RESIN TRANSFER MOULDING (RTM)

Standard RTM with or without Vacuum assistance, Light RTM (LTRM) for quick development and low cost solution for lower and medium production runs. MIT RTM fully automized PLC controlled process for higher production runs. Material processed Polyster, Phenolic and Exposy etc. filled with ATH or Talc with very special Glass Reinforcement like continous Filament, Multidirectional Fabrics, Sandwich Mats with Special Cores and Glass Cloth etc.

SMC

Parts produced with special pre-preg of materials like Vinyl Easter Resins with 45% Glass. Parts produced for special Locomotive Applications for example Babbins.

HAND LAYUP

Glass Fibre Reinformed Moduling with Hand Layup process is done using with very sophisticated Resin with catalyst dispensing machine parts produced as big as 35 X 14 X 14 feet for Windmills.

WOOD STOCK

For Car Iinteriors processed using base material Polypropylene with Fibrecs / PVC / Leather Cloth with Metal and Injection Moduled Plastic Inserts. Single shot finished component process.

TECHNO POLYMER STURUCTURES (AZDEL)

Polypropylene Sheets with high glass content formed under Thermo-Compression process. Automobile parts produced with this technology where light weight and high end performance is required.

INJECTION MODULING

Machines from 80 to 850 tons processing materials ABS Polycarbonate, Polypropylene and Nylon filled with Glass or Talc.

RECTION INJECTION MODULING (RIM)

Process with very special Polyurethane Elastomer, structure Polyurethane and DCPD added recently. Parts to be produced like Car Body Kits & Tractor / Truck / Earth Moving Equipments Body Panels.

AUTOCLAVE / QUICKSTEP

Three spray booth with FOZ, ovens and conveyers. Automobile parts are painted to match the car body like Rear and Spoliers, Door Handles, Mirror etc. Special Polyurethane and Water based paints are used, procured with India, USA and Europe as per customer requirements. Special textures / steeples and antigraffiti requirments are also met.

PAINTING

Three spray booths with FOZ, ovens and conveyors. Automobile parts are painted to match the car body like Rear End Spoilers, Door Handles, Mirror Cover etc. Special Polyurethane and Water based paints are used, procured from India, USA and Europe as per Customer requirements. Special textures /steeples and antigraffiti requirements are also met.